Tube & Fitting
Assemblies permit safe, reliable and convenient operation of miniature
Joule-Thomson Cryostats. The
standard 0.040 inch (1.0 mm) diameter x 0.005 inch (0.1 mm) wall copper-nickel
tubing has been found to be a convenient means for plumbing high pressure
gas lines. The flexibility of the small-diameter tubing is essential
in reducing the stress imposed on glass Dewars by high pressure plumbing.
Tubing and fittings are rated for 7,500 psi service; burst pressures
are in excess of 20,000 psi.
R.G. Hansen and Associates' miniature pressure
fittings are designed for compatibility with all RGH miniature cryostats
and with 0.040 inch (1.0 mm) flared tubing. Adapters are available
to fit military and commercial hydraulic components.
When our standard P/N 5009, is delivered is is straight
in a protected shipping container. When ordering lengths other than
15", Apply P/N 5010-xx, where xx is the length determined by
the purchase order.
We also offer a Single; Flared tube & fitting assembly that
is standard 25": P/N 5008.
This tube & fitting
assembly was designed for use with one of our demand flow cryostats
end item assembly. All bends, curves and joints were examined carefully
to the customers requirements.
Just
a small sample of what we offer. All hardware shown on this page can
be ordered separately. for complete listing of fittings and adpaters
please use our general request form.
